2024+ Tesla Model 3 Highland Real Carbon Fiber Front Bumper Air Intake Blades Trim

✅ Compatible With:

• 2024+ Tesla Model 3 Highland Performance

❌ Not Compatible With:2017–2023 Tesla Model 3,2018–2023 Tesla Model 3 Performance,2025.10+ Tesla Model 3 Standard,2024+ Tesla Model 3 Highland

These are 100% real carbon fiber aerodynamic blades made exclusively for the 2024+ Model 3 Highland. They refresh the front bumper’s look for a sportier style, improve airflow, reduce turbulence, and protect the original vent area from scratches and minor impacts.

Designed for Model 3 Highland

Precise Fit for the Performance Front Bumper

• Designed around the factory bumper and air intake area

• Maintains the original vent opening and airflow path

• Low-profile design integrates with the OEM body lines

• No drilling, cutting, or permanent modification required

• Designed for a clean, factory-style appearance

Real Carbon Fiber

Real Carbon Fiber. Real Woven Texture.

Unlike ABS plastic with a printed carbon pattern, this trim is made from genuine carbon fiber and finished with a glossy clear coat.

The result is a distinctive woven texture that gives the front bumper a more premium, performance-inspired appearance.

Real carbon fiber — not carbon-look plastic.

Designed Around the Vehicle's Sensor Area

Exterior Trim With Sensor Clearance

The blades are installed on the outer bumper area and are designed to stay clear of the vehicle's front sensors and driver-assistance hardware.

The installation does not require changes to the vehicle's electrical or sensor systems.

Clean Look. No Added Noise.

OEM-Inspired Fit and Finish

The 1:1 molded design follows the contours of the Model 3 Performance bumper for a close, secure fit.

Its low-profile shape is designed to avoid unnecessary protrusion, helping maintain a quiet driving experience without added vibration or noticeable wind noise.

Easy Installation

The front air intake trim can be carefully removed without drilling or cutting the bumper.

1. Clean and dry the installation area thoroughly.

2. Align the trim carefully before applying pressure.

3. Press firmly along the entire surface.

4. Allow at least 24 hours for the adhesive to cure before high-speed driving or pressure washing.

What's included?

1 Pairs Front Air Intake Trim

FAQ

1.Is this real carbon fiber?

Yes. The trim is made from genuine carbon fiber with a glossy clear coat. It is not carbon-pattern ABS or plastic.

2.Will it affect the original air intake or cooling system?

No. The design keeps the factory air intake area open and does not require modification to the cooling or intake system.

3.Will it interfere with front sensors or driver-assistance features?

The trim is mounted on the outer bumper area and is designed to stay clear of the vehicle's sensor hardware. It does not require any electrical or sensor modifications.

4.Can it fall off during high-speed driving or pressure washing?

When installed correctly on a clean, dry surface and allowed to cure for at least 24 hours, the automotive adhesive provides a strong bond for normal driving, rain, and car washing.

5.Will it create wind noise or vibration?

The close-fitting design follows the bumper contours and is designed to minimize gaps, vibration, and additional wind noise.

6.Can I remove it later?

Yes. It can be carefully removed without drilling or cutting the original bumper. Remove it slowly and use a suitable automotive adhesive remover if needed.