It looked great for a week UNTIL.... I washed my car.
I applied the adhesive promoter (which also seemed to discolor my bumper) and installed as directed. Went through a car wash and it popped off, didn't notice until later. Have used other taped accessories on my car with many car washes for over a year without any issue.
Dear Michael, Thank you for your feedback. We're sorry to hear the part came off during a car wash. Our team has reached out to you directly and requested photos so we can look into what happened and provide a solution, including a replacement part. For best results, we recommend avoiding car washes for 24–48 hours after installation so the adhesive can fully bond. We appreciate you bringing this to our attention and look forward to your reply.
Sincerely,
Yeslak Team
Vor 14 Tagen bestellt, Lieferung dauerte circa sechs Arbeitstage. In der vorgeheizten Garage montiert/verklebt. Das Ergebnis war wirklich sehr ansehnlich👍 allerdings schien mir die Montage mit dem Klebeband von Anfang an sehr suspekt. Heute in der Waschanlage gewesen, im Anschluss nach Hause gefahren. Dort musste ich feststellen, dass leider eines der Bauteile nicht mehr vorhanden war. Sicherlich in der Waschanlage verblieben. Eine Nachfrage dort blieb leider erfolglos. Somit leider nur drei Punkte für die Art der Befestigung. Eine Verschraubung wäre ihr bauartbedingt sicherlich auch möglich gewesen und hätte besser gehalten. Sehr schade, ich werde die restlichen drei Bauteile entfernen, eine neuerliche Investition von 136 € werde ich sicherlich nicht vornehmen.
Hallo Hammu,
vielen Dank für Ihr ehrliches Feedback – es freut uns, dass Ihnen Optik und Montageergebnis gefallen! Es tut uns leid, dass sich ein Teil nach dem Waschstraßenbesuch gelöst hat. Wichtig zu wissen: Der Kleber erreicht seine volle Haftkraft erst nach 24–48 Stunden – in dieser Zeit bitte nicht waschen und keinen direkten Hochdruckstrahl auf die Kanten richten. Zudem ist eine gründliche Reinigung und Entfettung der Klebefläche vor der Montage entscheidend.
Wir haben Sie bereits direkt kontaktiert, um die Einzelheiten Ihres Falls zu klären. Bitte senden Sie uns Ihre Bestellnummer und ein Foto der betroffenen Stelle, damit wir Ihnen kostenlosen Ersatz für das fehlende Bauteil zusenden können. Ihren Hinweis zur Verschraubung geben wir zudem an unser Produktteam weiter.
Beste Grüße
Yeslak Team
Installazione semplicissima, rimuovi 2 adesivi e attacchi.
Vediamo se ci saranno problemi di flussi
I bought the matte tweed carbon fiber. It fits perfectly and looks great. It's thin, so it doesn't interfere with the sliding mechanisms. Great product. I consistently get high quality products from yeslak.
The upper dashboard part fits ok, it takes quite a bit of force and effort to get it aligned so that all tabs slot in correctly and lock.
The lower dashboard part is a poor fit, there are gaps where you can see the trim underneath, the adhesive is very poor and I suspect it won't last long.
It also feels very plastic and not at all like carbon fibre trim. I ordered the performance matte effect and the lower trim also had some scratches on it. I would not recommend.
We’re sorry to hear that. This isn’t the experience we want you to have. Please contact our support team with your order details and photos so we can review the fit and finish concerns and help make this right.
Great product and fits really well under the main console. Really easy to install as just strong magnets holding in place, but gives you a nice extra storage draw for keys, sunglasses etc.
L'installazione è semplice,io ho fatto un foro per fare passare il cavo e collegarlo alla freccia Sinistra ,acquistando anche un connettore ad y per avere maggiore scorta di cavo.Il diffusore presenta difetti di stampo,inoltre è leggermente più piccolo e c'è circa mezzo centimetro dai catarifrangenti sul paraurti (io ho sostituito con i frecce dinamiche),ma si adatta bene.L'ho trattato con protettivo,e lo farò ogni mese altrimenti nel giro di un anno sarà molto rovinato,mi è già capitato con lo spoiler,vediamo se dura di più.La cosa che mi piace è lo stop che con il collegamento che ho fatto va ad intermittenza durante la decelerazione della vettura e rimane fisso se si frena, questa deve essere la sua funzionalità.Il service Yeslak ,mi ha guidato al collegamento in maniera molto veloce.
My carbon fiber spoiler arrived damaged during shipping, but Yeslak’s customer support team handled the situation professionally from start to finish. They reassured me that the issue would be resolved and guided me through filing a claim with the shipping carrier. Within just a few business days, I received a full refund so I could place a new order.
The team was helpful, kind, and communicative throughout the entire process. I appreciate how they handled the issue and will happily continue doing business with Yeslak.
Für einen Tesla sind solche Wagenheber-Pads meiner Meinung nach eigentlich unverzichtbar, wenn man das Fahrzeug selbst anheben möchte. Gerade bei den Model 3/Y sollte man beim Aufbocken unbedingt die vorgesehenen Hebepunkte verwenden, da ein falsches Ansetzen Schäden am Fahrzeug bzw. an der Batterie verursachen kann. Tesla weist selbst ausdrücklich darauf hin, nicht unter der Batterie oder an den falschen Stellen anzuheben.Die Pads passen sehr gut in die dafür vorgesehenen Aufnahmen und geben dem Wagenheber einen sauberen und sicheren Auflagepunkt. Dadurch lässt sich das Fahrzeug ohne direkten Kontakt des Wagenhebers mit dem Unterboden anheben, wodurch sich unnötige Beschädigungen vermeiden lassen.Praktisch finde ich auch, dass gleich vier Stück enthalten sind und alles in einem passenden Aufbewahrungskoffer geliefert wird. So bleiben die Pads zusammen und sind bei Bedarf schnell zur Hand.Insgesamt ein sehr sinnvolles Zubehör für alle, die ihren Tesla selbst aufbocken oder daran arbeiten möchten (auch wenn es nur der Räderwechsel ist). Gerade bei einem Fahrzeug mit einer so teuren Batterie würde ich hier nicht auf irgendwelche improvisierten Lösungen setzen.
Looks great and fits well. Was super fast shipping too. Only problem I have is it didn’t come with the Tesla logo center cap like I expected when I ordered them. Otherwise very cool and nice “upgrade”.
Otherwise this would be 5 stars.
Got this lower console tray for my Model Y because that storage bin is basically a deep black hole where stuff just disappears.
It drops right in and fits so flush it honestly looks like an OEM part. Now I actually have a spot for my sunglasses, keycards, and charging cords instead of fishing around at the bottom while driving. Material feels solid, clean look, and super easy to lift out when I need to wipe it down. Simple upgrade, but makes a huge daily difference!
Perfect addition to my 2026 Model Y Juniper. It turns that deep lower bin into actually usable storage space.
Fit: Drops right in with no gaps or shifting.
Material: Soft, sturdy TPE—stops keycards and small items from rattling.
Clean look: Matches the factory black finish seamlessly.
Super easy to remove and wash when needed. For the price, it’s a no-brainer upgrade.
This center console organizer fits really well and looks like it came straight from the factory. It blends right in with the interior and adds some much-needed extra storage space. Highly recommend!
This organizer fits perfectly in the lower console area and makes great use of space that usually gets cluttered. The dual-chamber layout is clever. I really like the top section with the grid opening and removable lid because it keeps smaller items hidden but still quick to grab. The lower open section is great for separating larger things so they do not slide around while driving.The material feels durable and tough. It is made of a flexible rubber-like plastic that seems like it will hold up well over time without cracking. Cleaning it is very easy since you can just pull the tray out and wipe it down if it gets dusty. It stays firmly in place and does not rattle at all when the car is moving.This is a great quality product.
Looks great and fits well. Was super fast shipping too. Only problem I have is it didn’t come with the Tesla logo center cap like I expected when I ordered them. Otherwise very cool and nice “upgrade”.
It first well on my Tesla Model Y 2026 JUNIPER. A little larger than my actual vents under the seat, but they fit regardless. They work perfectly with my all weather mats and dont get in the way. Place and forget! For the price, these are worth. I didn't want to bother with plastic vent covers that might not fit perfectly and get in the way of the floor mats, so I went with these velcro solutions.








